For laboratory research only • Ordering not yet available
GOAT CERT / Documentation guide

How to read
a peptide COA.

Check the identity, connect the lot and understand what each result measures.

Read beyond the percentage.

Keep the sample, lot and method together with the original document.

IdentityLotTest scope

A certificate of analysis, or COA, records test results for an identified sample. To evaluate it, look beyond the headline percentage: check the sample description, lot information, analytical methods and what the laboratory actually measured.

GOAT CERT is GOAT Certified Peptides' branded report lookup. It is intended to connect product and lot information with original laboratory documents. It is not a separate certification body. Original laboratory reports are available in the GOAT CERT report library, organized by compound, strength and lot. Report availability is separate from product availability.

1. Identify the document and sample

Start with the laboratory name, report number, report date and sample description. Compare the full compound name and specification with the product you are evaluating. An abbreviation alone may leave important details unclear.

For a blend, check the individual ingredients and amounts as well as the total. For formulations with similar names, confirm the precise identity rather than assuming two listings describe the same material.

2. Match the lot through the records

Compare the lot on the physical vial with the supplier's shipment records and the lot identified on the report. If the laboratory uses a sample identifier rather than the commercial lot number, the records need to explain the connection.

A working report-verification link helps establish that a document is authentic. It does not, by itself, establish that the vial you received came from the material tested. Authentication and lot matching are separate checks. If that connection is missing, ask for clarification and keep the status unresolved.

3. Read methods and units alongside results

Identify the test used for each reported result. A molecular-mass measurement, a chromatographic purity result and a measured quantity answer different questions.

Biomatik's peptide-analysis documentation distinguishes mass spectrometry, HPLC purity and peptide-content analysis. Its explanation of UV-HPLC notes that water and salts are not accounted for by the peptide-bond signal used in that analysis. Consequently, a chromatographic purity percentage should not be treated as the percentage of the entire vial's powder that is the desired peptide. Interpret the specific laboratory's method and definition. Biomatik peptide synthesis FAQ, questions 21–22.

If the report gives a quantity in milligrams, read how that quantity was determined and which component it describes. For a blend, a total amount does not substitute for results identifying and quantifying the individual components.

Examples from the catalog

Compare the listed amounts with the published batch-result fields on these product pages. Select the matching strength and lot, then open the original report in GOAT CERT.

4. Separate measured results from other claims

Use this checklist to keep the claim and its evidence together:

QuestionWhat to look for
Is the sample identity supported?The stated identity method, result and laboratory interpretation
What does the purity result mean?The method, definition, units and reported qualifications
Is the stated amount measured?A quantitative result and method, distinct from the label's nominal amount
Does the report cover every blend component?Component-specific results or an explicit explanation of scope
Are other properties tested?Explicit results for those properties; do not infer them from purity

Do not convert a purity result into an unreported claim about sterility, endotoxins, residual solvents, shelf life or transport stability. Those questions require evidence appropriate to the particular property. A COA also does not establish suitability for human or veterinary use.

5. Check the original source

When the issuing laboratory offers report verification, use its official verification service and compare the report identifier and contents. Follow a genuine laboratory link rather than relying only on a cropped image or a supplier's summary.

Record whether you authenticated the document and whether you matched it to the lot. Do not describe either check as complete when it remains pending. Keep the original report and any qualifications visible alongside a summary.

6. Resolve discrepancies before relying on the record

Missing lot information, differing amounts, inconsistent names or an unavailable original report are reasons to request clarification. Preserve the relevant product specification, shipment records and report together. Record corrected documents with their dates and explain what changed.

For a GOAT CERT record, contact hello@goatpeptidesusa.com with the compound, the lot on the label and the report identifier. Avoid sending unnecessary personal or payment information.

7. Use the QR code on your vial label

Scan the vial-label QR code to open its GOAT CERT lot record. Compare the compound, nominal strength and lot with your label, then open the original analysis and any accompanying panels. Review the product-specific storage guidance alongside the report; an analytical result does not replace storage instructions.

You can also open a product in the research catalog to review batch results, then follow its GOAT CERT link to the original documents. For example, see the BPC-157 batch results or GCP-3RT triple-receptor agonist peptide batch results.

Common questions

Does high purity prove the amount printed on the label?
Read the separate quantitative evidence. A chromatographic purity result and a measured amount are different results.

Does an authentic report prove my vial matches the tested sample?
You also need the lot and shipment records that connect the material to that report.

What if no report is available?
Treat the report as unavailable. A design label, sample QR code or report from another batch cannot fill the gap.

What does GOAT CERT mean?
It is the name of GOAT's report lookup. Evaluate each record by its original document and stated testing scope.

Find the right report by strength or volume

Compare the strengths and volumes in our current assortment with the published batch records. Product availability and COA coverage are shown separately. Open a product for pricing and storage guidance, or choose a lot to view its original documents in GOAT CERT.

19 current strength and volume options · Published report coverage
Product & listed amountMatching report sets
BPC-157
10 mg
Availability pending
GHK-Cu
50 mg
Availability pending

No matching 50 mg COA published.

GHK-Cu
100 mg
Availability pending
Tesamorelin
10 mg
Availability pending
MOTS-C
10 mg
Availability pending
MOTS-C
20 mg
Availability pending
GCP-3RT
10 mg
Availability pending
GCP-3RT
30 mg
Availability pending

No matching 30 mg COA published.

GCP-3RT
40 mg
Availability pending
GCP-2TZ
20 mg
Availability pending

No matching 20 mg COA published.

GCP-2TZ
30 mg
Availability pending
Wolverine Stack
20 mg
Availability pending
Ipamorelin / CJC-1295 No DAC
10 mg
Availability pending
KLOW Blend
80 mg
Availability pending
Reconstitution Solution
3 mL
Available

No matching 3 mL COA published.

Reconstitution Solution
10 mL
Available
30mL Reconstitution Solution
30 mL
Available

No matching 30 mL COA published.

Ipamorelin
10 mg
Currently unavailable
Cagrilintide
5 mg
Currently unavailable

No matching 5 mg COA published.

Compare the lot on your vial with the report you open. For the lookup steps, see vial QR and GOAT CERT access.

Keep the source in view.

Check report status in GOAT CERT or read about the records behind a product listing.